EOC-2610 is a Long Range outdoor wireless Access Point / Client Bridge that operates seamlessly in the 2.4GHz frequency spectrum and provides high bandwidth up to 108Mbps with SuperG. EOC-2610 features high transmit output power and high receive sensitivity. High output power and high sensitivity can extend range and coverage to reduce the roaming between Access Points and to deliver a more stable wireless connection. It also reduces deployment expenses on the equipments.
Now you can update your access point senao eoc-2610 to dd-wrt firmwares
Now you can update your access point senao eoc-2610 to dd-wrt firmwares
- Configure your local computer IP address to 192.168.1.11.
- Connect to the RedBoot bootloader by telnet on 192.168.1.10 (some have 192.168.1.1) and port 9000. Enter telnet command at the moment Ethernet LED lights up after powering on the EOC-2610 board (about 10 sec. after power on). Because timeslot for this is short, you might need several tries.
- Enter the RedBoot console by pressing CTRL+C.
- Copy linux.bin to your TFTP server directory. (once you installed a tftp server)
- Configure the RedBoot bootloader IP and TFTP server settings using ip_address -l [local ip address] -h [remote server address]
Flash the unit by entering the following commands:
RedBoot> fis init
About to initialize [format] FLASH image system - continue (y/n)? y
*** Initialize FLASH Image System
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> load -r -b 0x80041000 linux.bin
Using default protocol (TFTP)
-
Raw file loaded 0x80041000-0x80663fff, assumed entry at 0x80041000
RedBoot> fis create linux
... Erase from 0xa8030000-0xa8653000: ...................................................................................................
... Program from 0x80041000-0x80664000 at 0xa8030000: ...................................................................................................
... Erase from 0xa87e0000-0xa87f0000: .
... Program from 0x80ff0000-0x81000000 at 0xa87e0000: .
RedBoot> fconfig
Enter the bootscript:
fis load -l linux
exec
Save the config and do:
RedBoot> reset
You can download firmware dd-wrt .bin files click here use search to find fiirmware.